UPVC Replacement Door Handles
The handles on your doors are worn out over time and will need to be replaced. It is essential to keep the same dimensions as the old handles when replacing them.
The top screw position the lever, and the keyhole size are the three measurements that you need to check. Refer to the size guide for help with this.
Inline Lever/Lever
A lever/lever handle is a contemporary door handle that is designed to fit new or replacement doors. This style of door handle is available in a wide range of styles & finishes. This handle is offered by a number of manufacturers including Avocet ERA Fullex Hoppe Mila Millenco Yale.
Fab and Fix Windsor Inline Sprung Lever Door Handle
The handles made of uPVC/Composite are made of tough materials and are perfect for multi-point lock doors that require a robust design. The handles are inline and operate from the same spindle and screw fixings, so they can be easily incorporated into existing or new uPVC/Composite doors.
The sprung lever design allows the handle to be placed and angled to provide a comfortable grip and is suitable for all users. The handle has been endurance tested to 200,000 cycles, which will ensure the quality of the finish and the performance of the handle over time. The lever that is sprung can be reduced to accommodate a wider range of locks. This is particularly useful for doors with narrower openings where the cylinder is situated further back from the door. A shorter lever is an ideal choice for doors that have latches that can be opened by a thumb turn located on the inside.
Lever Pad
A Lever Pad upvc door handle operates differently than lever handles that are found on the majority of doors. These handle types can either operate from a single spindle (inline) or independently from both sides using two inline or offset spindles (pad). They are typically employed on UPVC doors with double glazing. They are available in a range of finishes & variations.
The handles are available in a variety of finishes including White Chrome and Gold. The finish is in line with BS EN 1670:2007 Grade 5 and is also resistant to corrosion, thereby giving the handle a high level of durability and performance for its intended use.
All of the UPVC handle lever pad styles come with a spindle and screws that allow them to be put on any new or existing uPVC door. The backplate fixing centers of 211mm allow for a wider handle, which can be beneficial when replacing a damaged or worn multi point door lock mechanism. These handle levers have springs, which can solve the problem of door handles that sag out of horizontal position when not being used.
door handle repair repairmywindowsanddoors is crucial to match up the PZ dimensions for both the multipoint lock and the uPVC doors when selecting the replacement UPVC spindle and handle. This measurement is also called the 'handle centre' or 'cylinder centres and is an essential aspect in ensuring that you have the correct handles.
After you have identified the proper PZ size it is important to make sure that the lever and push pads are shaped to fit the American with Disabilities Act compliant handles you require for your door. They are usually a square or round shape with an internal lever and external push pad.
Most of the UPVC lever pads we sell are sprung, meaning that they will return to their horizontal position after not being used, instead of hanging out and possibly sticking in the frame. This prevents drafts and cold air from entering a home. The majority of UPVC lever pad handles are available in left and right handed versions, allowing them to be placed on either side of doors.
Euro Cylinder
Cylinder locks are typically used on uPVC doors, but can also be used on other types of door. Cylinder locks are operated by using a key that unlocks the cylinder's case. This reveals pins that can be aligned with the pins in the lock, and permit them to rotate the revolving camera, opening the door. Euro cylinders can be fitted with up to six pins. Internal and external doors require different levels of security.
The choice of cylinder you choose is essential. It is based on the type of use your doors and handles receive. Doors that are external, for instance should be equipped with higher security cylinders while internal doors can be secured with the standard cylinder. Some cylinders have extra features that increase security, for instance, anti-drill or anti bump properties.
A euro cylinder needs to be properly measured to ensure that it is the correct size for your door. The cylinder should be measured from the screw hole at the center to the ends of the cylinder. This includes the thumb turn, in the event that one is present. It is best to do this with the lock in place, but when this isn't possible, you may remove it to take measurements. It is crucial to avoid having a extension of the cylinder beyond the handle or escutcheon. This could make it vulnerable to lock snapping attacks.
The design of many modern cylinders comes with anti-drilling as well as bump resistance features. They are designed to decrease the risk of attack by forcing the cylinder rotate in the opposite direction. This helps deflect the attack and keep your doors safe.
There are cylinders that have been made to resist snapping. This is a common attack on cylinders. A special tool is used to break the lock's break line and then the front of cylinder is snapped off. This is a faster and simpler method to gain access than using the use of a multipoint locking system. It also leaves less evidence of the burglary which can delay insurance claims.
Spring Cassette
The spring cassette is positioned within the base of the door handle backplate, providing a spring solution to return the multipoint lock handles back to their normal position after use. In the past, a lot of these types of handle did not have a spring built into them, and as a result, they are more likely to slide or drop when the locking mechanism is disengaged. This simple feature is one of the best methods to correct this, and is a great way to prevent your upvc doors from getting stuck in the open or closed position, since they aren't always simple to close manually.
These spring cassettes are specially designed for use with sprung multipoint locks but they won't work with non-sprung multipoint handles. You must have a custom hole cut into your backplate to allow these to fit (please check the image for a technical diagram). These cassettes can be used as a replacement for damaged or missing cassettes on the backplate of uPVC door handles. They are sold as one unit. They come with a square cut out that is able to accommodate an 8mm shaft.
These spring cassettes offer a great value solution to the problem of door handles that have become sagging. They are simple to install and will increase the lifespan of your uPVC door. For more information about our selection of uPVC accessories and spares, contact us today. in touch with our team. We are here to help and happy to offer expert advice.